Stay productive with Punch, the insightful time tracker that earns you more. Try it now!
Fiber glass Leer 122 shell
Tongue and groove 1/4" cedar boards. Light weight and smells amazing. Coated with clear polyurethane. Ceiling insulation is R 28.
Shiplap paneled roof.
Timber panels
Insulated And Covered In Tongue-And-Groove Cedar Panels.
Raw timber boards
Batons Sikaflexed to roof, then 4mm ply.
5/16" cedar paneling with varathane gel stain
You guessed it; Celotex. Roofing Battens to provide support for: Click-lock Cladding.
The roof install requires a few people for initial placement. Using four 4x4” blocks to hold the roof about 1.5’ off the shell is optimal for installing the scissor lift mechanism.
None. One of us is tall and we needed the precious height. Although, having a bare ceiling means we can put magnetic lights on the ceiling.
Cork underlay, as per the walls. Insulation is mylar, wadding and plastic sheets. Then curved 5mm wooden slats.
Spruce cladding stained with danish oil. Always get compliments on how nice it looks.
Dow or Owens Corning Sheet Foam Insulation Board
Foam backed vinyl
Insulated styrene panels covered in vehicle interior fabric. Built in LED's using clear corrugated roofing.
1"x8"x12' pine ship lap-stained and sealed
1/4" Birch plywood with lath (timber slats) over the top. Wood stain applied afterwards.
Insulated with 3m Thinsulate, same shiplap boards